Home
| Meat Grinders
| Meat Grinder Parts
| Sausage Stuffers
| Meat Tenderizers
| Vacuum Chamber Sealers
| Manual Meat Grinders
Meat Slicers
| Electric Butcher Saw Blades
| Electric Butcher Saws
| Books & Videos
| Sausage Spices
| Meat Mixers
| Bowl Choppers
| Knives
| Patty Presses
| Wrapping Paper & Accessories
| Sausage Casings & Twine
| Meat Curing and Smoking
| Site Map
| Xml Sitemap
| Video Sitemap
| ROR Sitemap
Stuffing Tubes for: Tre Spade - Leonardi - Weston - Tubes with 2" base
Stuffing Tubes for: Tre Spade With Bayonet-Style Stuffing Tubes (Twist On)
Stuffing Tubes for: ProProcessor Hydraulic Sausage Stuffers
Stuffing Tubes for: ProProcessor Manual Sausage Stuffers
|
| Stuffing Tube 3/8" Diameter Aluminum (Item #699920) Also fits above stuffers and others that accept 1.5" base 4.5" long For small beef sticks and snack links Needed for 18mm casings
|
|
| Stainless Steel Sausage Stuffing tube 3/8 in. diameter - also fits above stuffers and others that accept 1.5" base-4.5" Long Has 1.06 o.d. at base so measure the hole in your stuffer nut. You may have to enlarge it. (Item #699925) For small beef sticks and snack links needed for 18mm casings
|
 | Stuffing Tube 1/2" Diameter Aluminum (Item #699921) Also fits above stuffers and others that accept 1.5" base. For smaller links - weiners - snack sausages. Good for 23mm casings.
|
 | Stuffing Tube 1/2" Diameter Aluminum (Item #700136) Also fits above stuffers and others that accept 1.5" base For smaller links - weiners - snack sausages Will accept collagen casings.
|
 | Extra Long Aluminum Stuffing tube 1/2 in. diameter - 8" long untapered- (Item #700139) Also fits above stuffers and others that accept 1.5" base For standard link and large sausages Can be used for small beef sticks and snack links needed for 23mm casings Will accept collagen casings
|
 | Stuffing Tube 3/8" Diameter Aluminum (Item #700135) 5" long 1.5" base Great for small beef sticks and snack links Needed for 18mm casings Will accept collagen casings.
|
|
| Stuffing Tube 3/4" Diameter Aluminum (Item #699324) Fits new sausage stuffer nuts #699919. For standard link and large sausages.
|
|
| Stuffing Tube 3/4" Diameter Aluminum (Item #699922) Fits Chop-Rite & Enterprise sausage stuffers and others that accept 1.5" - 5.5" long. For standard link and large sausages. Fits older stuffer nuts not new #699919 stuffer nut.
|
|
| Stuffing Tube 3/4" Diameter Aluminum - (Item #700137) 5" long. Also fits above stuffers and others that accept 1.5" base.
|
|
| Aluminum Stuffing tube 3/4 in. diameter - 8" long untapered - (Item #700140) Also fits above stuffers and others that accept 1.5" base For standard link and large sausages Will accept collagen casings.
|
 | Nut for Chop-Rite or Enterprise Sausage Stuffer (Item #699919) Fits both #35 eight quart, #31 eight quart and #25 four quart stuffers. Fits most cast iron stuffers that use 2 lugs to lock on. Can be altered to fit others. Front center hole is .98 I.D. Back opening measures 1.75" x 1.56" Use with #699324 3/4" tube not #699922
|
 | Sausage Pricker (Item #610501) To get rid of air in your sausage as you are making it. Whether with a stuffer, grinder or however you choose to make it.
|
  | Low Gear for Enterprise and Chop-Rite Sausage Stuffers (Item #699807) This sprocket drive is shown above mounted on a Chop-Rite stuffer. Provides 2.5 : 1 power ratio for additional leverage when using the smaller stuffing tubes.
|
