Chop Rite parts - Stuffer Tubes - Weston SS Parts - Sausagemaker SS parts - 50Lb Hydraulic SS parts
Parts for ProProcessor Manual Sausage Stuffers - Horizontal and Vertical
 | O Ring for 15 Lb stuffer from ProProcessor (Item #700253)
|
 | O Ring for 20-40 Lb stuffer from ProProcessor (Item #700254)
|
 | Extra 15 lb. ProProcessor Stuffer (Item #700255) Speeds up stuffing time when an empty canister can replace the full one. This tube fits the ProProcessor 15 lb stuffer.
|
 | Extra 20 lb. Canister for ProProcessor Stuffer (Item #700256) Speeds up stuffing time when an empty canister can replace the full one. This canister fits the ProProcessor 20 lb stuffer.
|
 | Extra 30 lb. ProProcessor Stuffer (Item #700257) Speeds up stuffing time when a full canister can be replaced by an empty one. This canister fits the ProProcessor 30 lb stuffer.
|
Parts for Cast Iron Enterprise Sausage Stuffers & Chop-Rite Sausage Stuffers
These parts fit Chop-Rite stuffers and most Enterprise and some other brands but they are the only parts still being made for older cast iron sausage stuffers so it may be worth an attempt to rebuild your older stuffer even if it is another brand.
| Large Pluger Plate for #35 Sausage Stuffer 8 quart 8 1/8 in. in diameter (Item #699751) As shown on right above.
|
 | Chop-Rite or Enterprise Sausage Stuffer Nut (Item #699919) Fits both #35 eight quart and #25 four quart stuffers. Fits most cast iron stuffers that use 2 lugs to lock on. Can be altered to fit others. Front Center hole is .98 i.d. Back opening measures 1.75" x 1.56" Use with #699324 3/4" tube not #699922
|
| Stainless Steel Strainer Basket for #35 stuffer (8 quart) (Item #699761) Great for pressing lard or fruit. Measures 9in tall and 8in in diameter.
|
| Perforated Strainer Base for #35 (8
Qt.) stuffer (Item #699763) Needed with screen above.
|
|
| Small Plunger Plate for #35 (8 Qt.) Sausage Stuffer 7 7/8 in. in diameter (Item #699757) Needed to fit inside Strainer Screen above.
|
|
| Stainless Steel Strainer Basket for #25 (4 Qt.) sausage stuffer (Item #699762) Great for pressing lard or fruit. Measures 7" tall and 6.5" diameter.
|
| Side Bolts for 8 Qt. cast iron sausage stuffer (Item #700067) Made in USA includes 2 bolts - 10.5" long
|
| Plunger plate-- large for #25
Stuffer 4 Quart size (Item #699750) 6 1/2" in diameter on left above.
|
|
| Perforated Strainer Base for #25 (4
Qt.) stuffer (Item #699764) Needed with screen above.
|
|
| Small Plunger Plate for #25 (4 Qt.) Sausage Stuffer 6 5/16 in. in diameter (Item #699756) Needed to fit Strainer Screen above.
|
| Stuffer Crank #25/#35 (Item #700052) Has square 1/2" hole.
|
| Large Cog for above stuffers (Item #700065)
|
| Small Cog for Chop Rite & Enterprise Stuffers (as noted aove) (Item #700064)
|
 | 8qt Rack Screw (Item #700063) This will fit an 8qt choprite stuffer and possibly an 8qt enterprise. Approx 16 5/8" long. About 1" around.
|
  | Low gear for Enterprise and Chop-Rite Sausage Stuffers (Item #699807) This sprocket drive is shown above mounted on a Chop-Rite Stuffer. Provides 2.5 : 1 power ratio for additional leverage when using the smaller stuffing tubes.
|
| Chain for Sprocket Drive (Item #699808) Chain for Sausage Stuffer Sprocket Drive.
|
 | Aluminum Stuffing Tube 3/4 in. diameter (Item #699324) Fits new sausage stuffer nuts #699919. For standard link and large sausages
|
|
| Aluminum Stuffing Tube 3/4 in.diameter fits Chop-Rite & Enterprise sausage stuffers and others that accept 1.5"-5.5" Long (Item #699922) For standard link and large sausages Fits older stuffer nuts not New #699919 stuffer nut.
|
|
| Aluminum Stuffing Tube (Item #699921) 1/2 in. diameter - also fits above stuffers and others that accept 1.5" base. For smaller links - weiners - snack sausages. Good for 23mm casings.
|
|
| Aluminum Stuffing tube 3/8 in. diameter - also fits above stuffers and others that accept 1.5" base-4.5" Long (Item #699920) For small beef sticks and snack links needed for 18mm casings
|
 | Aluminum Stuffing Tube (Item #700136) 1/2 in. diameter- untapered- also fits above stuffers and others that accept 1.5" baseFor smaller links - weiners - snack sausagesWill accept collagen casings.
|
Parts for RECENT Weston Sausage Stuffers
Will also fit Cabela's SS Stuffers
 | BACK IN STOCK!Stuffer Motor |
| Price: | US$289.99 |
|---|
 | Stuffer Nut for Weston (Item #700146) This nut will fit an 11, 20, and 30 lb. Weston Stuffer.
|
|
| Slow gear - bottom drive on 20-30 lb. stuffers (Item #660108) Splined shaft for low speed drive for stuffing. Has keyway in center for round 44 tooth gear
|
|
| Fast gear - top drive for 20-30 lb. stuffers (Item #660109) Splined shaft for high speed drive for returning piston to top. Has no keyway
|
|
| Round gear - 44 tooth for 20-30 lb stuffers (Item #660107) Round gear with keyway in center hole. 2 are used on 20 & 30 lb stuffers.
|
|
| Key For Round Gears (Item #660106) Fits 20-30 lb stuffers.
|
|
| Drive gear - 10 tooth gear (Item #660105) Has 10 large teeth and a keyway for round 44 tooth gear. This gear drives vertical shaft up & down.
|
| Vertical Geared Shaft (Item #660124) Fits 11lb stuffer. Has missing teeth at top and bottom to reduce damage.
|
|
| Vertical Geared Shaft (Item #660110) Fits 30 lb stuffers. Has missing teeth at top and bottom to reduce damage.
|
| Vertical Geared Shaft (Item #660120) Fits 20 lb Stuffers. Has missing teeth at top and bottom to reduce damage.
|
 | Stuffer Piston For Weston (Item #660122) This is a stuffer piston for an 11 lb Weston Sausage Stuffer.
|
|
| Thumbscrew for 20-30 lb Sausage Stuffer (Item #660130) Thumbscrew fits 20-30 lb sausage stuffers.
|
|
| Bottom Washer for 20-30 lb Sausage Stuffer (Item #660132) Bottom Washer fits 20-30 lb sausage stuffers.
|
 | Stuffer O-ring For Weston (Item #660123) This is a stuffer O-ring for an 11 lb Weston Sausage Stuffer.
|
 | Stuffer O-ring (Item #699787) This stuffer O-ring measures 5 1/2" in diameter.
|
 |
 | Extra Canister for 30 lb. Stuffer (Item #660116) Speeds stuffing time when a full canister can replace the empty one. This tube fits the Weston and Cabelas 11 lb stuffer.
|
|
|
 | Extra 20 lb. canister for 20 lb. stuffer (Item #660117) Speeds stuffing time when a full canister can replace the empty one.This tube fits the Weston and Cabelas 20 lb stuffer.
|
|
|
 | Extra 11 lb. canister for 11 lb. stuffer (Item #660118) Speeds stuffing time when a full canister can replace the empty one. This tube fits the Weston and Cabelas 11 lb stuffer.
|
|
| Piston (Item #660111) Fits 20-30 lb stuffers
|
|
| Piston Ring (Item #660115) Fits 20-30 lb stuffers
|
|
| Air Lock (Item #660112) Fits 11-20-30 lb stuffers
|
|
| Air Lock Spring (Item #660114) Fits 11-20-30 lb. stuffers
|
| Stuffer Handle (Item #660129) Fits 20-30 lb stuffers.
|
 | Lubri-Film Plus (Item #700150) Use this where any food handling equipment needs to be lubricated.
|
 | Food Grade Silicone Spray (Item #699570) Stops sticking and prevents rust formation on food packaging and processing equipment. This product is authorized by the U.S.D.A. for federally inspected meat and poultry plants and for incidental food contact. Spray can
|
Parts for EARLIER Weston Sausage Stuffers
Will also fit Earlier Cabela's SS Stuffers[an error occurred while processing this directive]
|
| Aluminum Stuffing tube 3/4 in. diameter - 5" long (Item #700137) Also fits above stuffers and others that accept 1.5" base
|
|
| Aluminum Stuffing Tube (Item #700136) 1/2 in. diameter- untapered- also fits above stuffers and others that accept 1.5" baseFor smaller links - weiners - snack sausagesWill accept collagen casings.
|
Parts for Sausagemaker Sausage Stuffer
| Stuffer O-ring 5lb (Item #699731) Replaces o-ring on 5lb stuffer piston.
|
| Stuffer O-ring 15lb (Item #699730) Replacement o-ring for 15lb sausage makers and stuffers.
|
|
| Trespode Stuffer O-Ring (Item #699788) This stuffer O-ring fits the Facem Trespode. Measures 6" in diameter.
|
Parts for ProProcessor Hydraulic Sausage Stuffers
Click here to see blowup parts page
| Adjustable Valve Speed Control (Item #699466) Fits all of our hydraulic stuffers.
|
| Electric Switch (Item #699467) Has three settings, up, down, and off. Fits all of our hydraulic stuffers.
|
| Adjustable Pressure Control Valve (Item #699468) This Control Valve fits all of our 30-50-70# Hydraulic Stuffers.
|
| Magnetic Valve-Pressure Control (Item #699469) Fits all of our hydraulic stuffers.
|
| Hydraulic Stuffer Pump 30-50-70 (Item #699486) Universal pump fits 30-50-70# hydraulic stuffers.
|
| Hydraulic Directional Control Valve (Item #699449) Includes both solenoids Fits all of our hydraulic stuffers.
|
| Hydraulic Stuffer Oil Manifold 4 Out (Item #699494) This Oil Manifold fits our 30-50-70# Hydraulic Stuffers.
|
| Hydraulic Stuffer Knee Switch (Item #699472) Knee Switch will fit all of our Hydraulic Stuffers.
|
| Hydraulic Stuffer Motor to pump adapter (Item #699475) .
|
| Hydraulic Stuffer Relay Switch (Item #699471) Fits all of our hydraulic stuffers.
|
 | 3 Piece Stainless Steel Sausage Stuffer Tube Set (Item #699926) 3 piece stainless steel tube set for hydraulic sausage stuffer #699679. Sizes 1 1/4" - 3/4" - 1/2". Has 2 9/16" flange and are 8 1/2" total length! Very stoutly made!
|
 | Hydraulic Sausage Stuffer Nut (Item #699451) This is a stuffer nut for a 50 lb hydraulic sausage stuffer. Fits Hydraulic Sausage Stuffer #699679
|
| Hydraulic Stuffer Piston Bolts (Item #699462) Contains eight bolts for the 30-50-70lb stuffer piston above.
|
Parts for 30lb Hydraulic Sausage Stuffer
 | Hydraulic Sausage Stuffer 30lb Lid Ring (1) (Item #699453) Used to seal the top and bottom of the Stainless Steel Cylinder on the 30lb Hydraulic Sausage Stuffer #600555
|
 | Hydraulic Stuffer 30lb Piston O-ring (1) (Item #699458) Fits 30lb Hydraulic Sausage Stuffer 600555 Each machine requires 3 o-rings - 2 on the piston and one in the lid.
|
Parts for 50lb Hydraulic Sausage Stuffer
| 50lb Hydraulic Stuffer Piston (Item #699459) Measures 10 1/8" across.
|
| 110v Hydraulic Stuffer Motor (Item #699470) Fits 50lb Hydraulic Stuffer only.
|
|
| Hydraulic Stuffer 50lb Piston O-ring (1) (Item #699450) Fits our part number 699679 Hydraulic Sausage Stuffer Each machine requires 3 o-rings - 2 on the piston and one in the lid.
|
|
| Hydraulic Sausage Stuffer 50lb Lid Ring (1) (Item #699452) Seals the top and bottom of the Stainless Steel Cylinder on the 50lb Hydraulic Sausage Stuffer #699679
|
Parts for 70lb Hydraulic Sausage Stuffer
|
| Hydraulic Sausage Stuffer 70lb Lid Ring (1) (Item #699454) Used to seal the top and bottom of the Stainless Steel Cylinder on the 70lb Hydraulic Sausage Stuffer #600556
|
|
| Hydraulic Stuffer 70lb Piston O-ring (1) (Item #699455) O-ring fits Hydraulic Sausage Stuffer #600556 Each machine requires 3 o-rings - 2 on the piston and one in the lid.
|
Home | Meat Grinders | Meat Grinder Parts | Sausage Stuffers | Meat Tenderizers | Manual Meat Grinders Meat Slicers | Electric Butcher Saw Blades | Electric Butcher Saws | Books & Videos | Sausage Spices | Meat Mixers | Bowl Choppers | Knives | Patty Presses | Wrapping Paper & Accessories | Sausage Casings & Twine | Meat Curing and Smoking | Site Map
