New Plates are just as important as new knives!To help identify your meat grinder, if the round plate with the holes is 2 11/16 inches in diameter and has a 3/8 in. hole in the center--you probably have a #10 or #12 grinder
If you have an old Hobart worn-out or broken grinder, you should consider one of the next two grinder heads to put it back in shape. Or maybe you have an old Hobart mixer -- You can change it into a perfectly good meat grinder with those same heads!
YOU CHOOSE! - Cast Iron or Stainless Steel!
 |
Stainless Steel Meat Grinder Head (Item #699746) Will fit American Eagle #12 and Hobart #12 and compatibles with 9/16" square drive and tapered stud that is 1 3/8" in diameter tapering up to 1 7/16" at body of head.
|
 |
Cast Iron Meat Grinder Head (Item #699700) Includes Stainless Steel Pan. Will fit hobart #12 and compatibles and compatibles with 9/16" square drive and tapered stud that is 1 3/8" in diameter tapering up to 1 7/16" at body of head.
|
 |
ProProcessor Stainless Steel Meat Grinder Motor (Item #699538) Compatible with American Eagle #12 and Hobart #12 and compatibles with 9/16" square drive .
|
|
Stainless Steel knife (Item #700083) Use for #10/12 manual or electric meat grinders. Fits ProProcessor #12 Square hole measures 12.1 mm or (.476")
|
 | Stainless Steel #10 Grinder Knife (Item #700078) Has .485" square hole
|
|
Grinder Knife for #10/12 Hardened (Item # 699954) Resharpenable--Used on Commercial Grinders. German made. Has .46" square hole
|
 |
Imported-Grinder knife for #10/#12
(Item #699979) Standard Pattern for manual or electric grinder. Square hole measures 12 mm or 15/32" or .46".
|
 |
Standard Carbon Steel knife for #10/#12 manual
or electric meat grinders. (Item #699953) Made in Germany. Square hole measures 12 mm or 15/32" or .46".
|
|
Grinder for #10/12 manual or electric meat grinders. (Item #699996) It has 3mm. (1/8") holes and is used for a fine grind. Hole in center measures 9.99mm or 0.393in. Plate is 8.05mm or 0.316in thick.
|
| Grinder Plate #10 3mm (Item #699864) Hole in center measures 10.28mm or 0.404in. Plate measures 6.95mm or 0.273in thick.
|
|
Grinder Plate for #10/#12 manual or electric meat grinders. (Item #699960) This plates holes measure 3 mm and is used for all sorts of fine grind.
|
|
Stainless Steel Grinder Plate for
#10-#12 Grinders (Item # 700098) 4.5 mm (3/16")holes Used for a hamburger grind
|
|
Grinder plate (Item#699862) For #10/#12 manual or electric meat grinders. This grinder has 4mm (3/16") holes and is used for a hamburger grind. Hole in center measures 10.20mm or 0.401in. Plate is 6.91mm or 0.272in thick.
|
|
|
Carbon Steel Grinder Plate for #10/#12 manual
or electric meat grinders. (Item #699939) This grinder has 4mm. (3/16") holes and is used for a hamburger grind. Hole in center measures 10.00mm or 0.394in. Plate is 8.59mm or 0.338in thick.
|
|
Stainless Steel grinder for #10/#12 manual or electric meat grinders. (Item #700087) This grinder has 6mm.(1/4") holes and is used for a sausage grind. Hole in center measures 10.24mm or 0.403in. Plate is 7.26mm or 0.285in thick.
|
|
Carbon Steel Grinder Plate for #10/#12 manual
or electric meat grinders. (Item #699961) This grinder has 6mm (1/4") holes and is often used for a sausage grind. Hole in center is 10mm or 0.394in. Plate is 6.46mm or 0.254in thick.
|
| Grinder Plate #10/12 Meat Grinder (Item #699802) Grinder plate is 6mm.Used for a coarse sausage grind.Made in Germany.
|
| Grinder Plate #10 8mm 5/16" SS (Item #700099) Hole in center measures 10.22mm or 0.402in. Plate measures 6.36mm or 0.250in thick.
|
|
|
Grinder for #10/12 manual or electric meat grinders. (Item #700111) This grinder has 8mm. holes and is used for a coarse sausage grind. Hole in center measures 9.98mm or 0.393in. Plate is 7.99mm or 0.314in thick.
|
|
|
Grinder Plate for #10/12 Grinders (Item # 699962) 8 mm. (5/16") holes. Hole in center measures 9.85mm or 0.388. Plate is 5.57mm or 0.219in thick.
|
|
Carbon Steel Grinder Plate for #10/#12 manual or electric meat grinders. (Item #699963) This grinder has 10mm. (3/8") holes and is used for a chili grind. Hole in center measures 10.09mm or 0.397in. Plate is 9.97mm or 0.392in thick.
|
| Grinder Plate #10 10mm 3/8" SS (Item #699744) Hole in center measures 10.15mm or 0.399in. Plate measures 6.20mm or 0.244in thick.
|
 |
Carbon Steel Grinder plate for #10/12 manual or electric meat grinders. (Item #699804)This grinder has 10mm. (3/8") holes and is used for a chili grind. Hole in center measures 9.96mm or 0.392in. Plate is 8.13mm or0.320in thick.
|
|
Carbon Steel Grinder Plate for #10/12 manual or electric meat grinders. (Item #699964) This grinder has 12mm. (1/2") holes and is used for a coarse chili grind. Hole in center measures 10.08 or 0.396in. Plate is 10.15mm or 0.399in thick.
|
| Grinder Plate for #10/12 Grinder (Item #699805) Made of Carbon Steel 12mm. (1/2") in. holes. Hole in center measures 10mm, plate is 8.28mm thick. Average grind for hamburger and sausage American or German made.
|
|
Carbon Steel grinder Plate for #10/12 Grinders.
(Item # 699806) 12mm. (1/2") in. holes. Hole in center measures 10mm or 0.393in. Plate is 8.28mm or 0.326in thick. Average grind for hamburger and sausage American or German made.
|
|
Stainless Steel grinder for #10/12 manual or
electric meat grinders. (Item #699745) This grinder has 12mm. holes and is used for a coarse chili grind. Hole in center measures 10.31mm or 0.406in. Plate is 7.38mm or 0.290in thick.
|
| Grinder Plate #10 20mm 3/4" (Item #700077) Hole in center measures 10.14mm or 0.399in. Plate measures 10.07mm or 0.396in thick.
|
|
Spacer plate that can be used on the #10/12 grinders. (Item #699707) This type plate is often used for sausage stuffing. Hole in center measures 10.33mm or 0.407in. Plate is 7.15mm or 0.281in thick.
|
|
Beaner Plate (Item #699854) Beaner plate that can be used on the #10/12 grinders and is used for sausage stuffing. Hole in center measures 10.20mm or 0.401in. Plate is 8.47mm or 0.333in thick.
|
| Set Screw for Meat Grinders (Item #699537) Holds grinder head in place on ProProcessor and American Eagle #12 & #22 meat grinders.
|
|
Grinder Stuffing Tube 3/4 in. for #10/12 and #333 Grinders (Item # 699983) Is used for stuffing regular sized sausage, 30mm and larger.
|
|
|
Grinder stuffing tube 1/2 in. for #10-12 griders (Item # 699982) Same as above for smaller sausage casings
|
|
Stuffing Tube for #10 Grinder 1/2" for stuffing sausage (Item #699568)
|
|
Grinder stuffing tube 3/4 in. for #10-12 grinders. (Item # 699569) Same as above for bigger sausage casings
|
|
Grinder Tube 10 2" (Item # 699958)
|
|
Stuffing tube set for #10-#12 Meat Grinder (Item # 699814) Has auger guide that offers little resistance to meat being processed. Includes 3 sizes of stuffing tubes. Plastic.
|
|
Cast pulley for #10 - #12 meat grinder. (Item # 699950) Designed for Chop-rite Brand but will fit other grinders.*Potentially dangerous when added to Meat grinders. Can cause amputation, possibly death!* Use only with meat pusher.
|
| Grinder Crank #10/12 for Chop-Rite/Enterprise (Item #699516)
|
| Grinder Stud #10 (Item #699521)
|
| Ring Nut # 12 for Chop-Rite/Enterprise (Item #699637)
|
| Meat Grinder Gear (Item #699559) Will fit Tre Spade and EARLIER Weston and Cabela's Meat Grinder BUT compare teeth. Outside of Gear has 41 teeth and inside has 9 teeth with the hole measuring 7.0"mm Should fit MOST #12 and #22 Meat Grinder.
|
| Meat Grinder Gear (Item #699558) Will fit Tre Spade and EARLIER Weston and Cabela's Meat Grinder BUT compare teeth. Outside of Gear has 73 teeth and inside has 18 teeth with the hole measuring 7.0"mm Should fit MOST #12 and #22 Meat Grinder.
|
| Meat Grinder Gear (Item #699557) Will fit Tre Spade and EARLIER Weston and Cabela's Meat Grinder BUT compare teeth. Outside of Gear has 37 teeth and inside has 12 teeth with the hole measuring 7.0"mm Should fit MOST #12 and #22 Meat Grinder.
|
| Meat Grinder Gear (Item #699550) Will fit Tre Spade and EARLIER Weston and Cabela's Meat Grinder BUT compare teeth. Outside of Gear has 42 teeth and inside has 12 teeth with the hole measuring 13.34"mm Should fit MOST #12 and #22 Meat Grinder.
|
| Meat Grinder Gear (Item #699553) Will fit Tre Spade and EARLIER Weston and Cabela's Meat Grinder BUT compare teeth. Outside of Gear has 42 teeth and inside has 6 teeth with the hole measuring 13.91"mm Should fit MOST #12 and #22 Meat Grinder.
|
| Leonardi Meat Grinding Gear (Item #601704) Outside of gear has 50 teeth and inside of gear has 10 teeth Fits #12 and #22 Meat Grinders
|
| Auger # 12 for Chop-Rite/Enterprise (Item #699506)
|
| Stainless Steel Auger fits #12 Grinder (Item #699613) Fits Pro Processer, American Eagle and Hobart
|
|
Grinder Extension (Item #699779)
|
| Grinder Pan (Item #699783) Replacement Grinder Pan. Holds extra meat in preparation for grinding. This pan has a 2.5" throat. Measures 9.75" x 13.75". Throat extends 2". This pan fits the aluminum safety extension cones for the #12, 22, & 32 grinders.
|
|
| Grinder Pan (Item #655005) Replacement Grinder Pan. Holds extra meat in preparation for grinding. This pan has a 2" throat. Pan Measures 9.75" x 13.75". Throat extends 2"
|
|
| Stainless Steel Meat Grinder Pan (Item #699630) Has a 2.25" Throat. Measures 9.75" x 13.75". Throat extends 2". Fits #12 American Eagle Meat Grinder.
|
|
1 1/2" Grinder Pusher (Item #699540)
|
| Wooden Grinder Pusher (Item #699542) For a #10/12 grinder. Measures 5.75" long and 1.25" at the widest part.
|
 |
Grinder Bushing (Item # 699947) Bushing fits #10/#12 Choprite and others. It provides thrust and a bearing surface so that the knife and plate can be forced together.
|
 | Snack Stick Kit #10/12 (Item #600540) This is the only way to make snack sticks or pepperoni with your grinder. Kit comes with all you need to make a great snack the whole family will love.
|
 | Meat Grinder Cleaning Kit (Item #699572) 5 assorted brushes and can of Silicon Spray.
|
Home | Meat Grinders | Meat Grinder Parts | Sausage Stuffers | Meat Tenderizers | Manual Meat Grinders Meat Slicers | Electric Butcher Saw Blades | Electric Butcher Saws | Books & Videos | Sausage Spices | Meat Mixers | Bowl Choppers | Knives | Patty Presses | Wrapping Paper & Accessories | Sausage Casings & Twine | Meat Curing and Smoking | Site Map
